|
Electrical |
|
Output Voltage |
1 V (coil 1), 0.5 V
(coil 2) RMS measured with a 12-pitch gear at 1
kHz, 0.028" probe gap. |
|
Coil Resistance |
300/600 ohms ± 10% |
|
Inductance |
40/80 mH ± 10% |
|
Insulation
Resistance |
100 Mohm (coil to
case) |
|
Polarity |
With approach of
ferrous material, white wire (coil 1) or
white/red wire (coil 2) is positive with
respect to paired black wire. |
|
Field Strength |
20 Gauss min (at
sensor tip) |
|
Mechanical-
Environmental |
|
Pole piece dia. |
Available in 1/8" pr
3/16" |
|
Operating
Temperature |
-65ºF to +300ºF |
|
Humidity |
95% |
|
Vibration |
0.036 D.A.
displacement, 5-75 Hz
10 g peak, 75-4000 Hz |
|
Electrical Wiring
|
Two Teflon jacketed
cables, with two 18 AWG wires (white-black and
white/red-black). |
|
Mounting |
5/8"-18 UNF-2A
threaded housing with locknut. |
|
Body Material |
303/304 stainless
steel, blind (sealed nose) end. |
|
Conduit Connection |
1/2"-14 NPT (male
thread). |
|
Encapsulation |
Epoxy resin: black,
300ºF temperature rating, resistant to gear oils
and synthetic oils. |
.gif){kind=small}
